Single-Tank Water Filtration and Softener Systems in Irvine
One tank on the main line that ends scale and spotting and cuts the chlorine taste and smell, sized to the hardness in your free water report.
Price a single-tank system — (949) 762-7921
Soft, filtered water from one tank
Many Irvine homes deal with two problems at once, hard water that leaves scale on fixtures and the chlorine or chloramine taste that comes with treated municipal supply. A single-tank system layers softening resin and carbon media in the same tank, so one unit on the main line handles both. It takes less room than two separate systems, which matters in tight garages and side yards. Irvine Water Systems sizes each combination tank to your measured hardness, your disinfectant and your daily water use, and tells you plainly when your water would be better served by separate tanks.
What a single-tank install includes
Two jobs in one tank only works when it is set up carefully. These are the pieces we handle.
Hardness and disinfectant check
We read both from your water report, because the tank has to handle the scale and the chlorine or chloramine at the same time.
Layered media
Softening resin and carbon are chosen and balanced for your water rather than poured in from a stock recipe.
Household water use
We factor in people, bathrooms and appliances to set capacity and regeneration for how you use water.
Metered control valve
The valve regenerates based on gallons used, which saves salt and water.
Brine tank placement
The salt tank goes where it is easy to refill and out of the walkway.
Drain and air gap
The regeneration line runs to an approved drain with the right air gap.
Bypass valve
You can bypass the system for outdoor watering or service without shutting off the house.
Salt and media guidance
You learn which salt to buy, how often to check it and when the carbon layer needs replacing.
How a single-tank job runs
Confirm it fits your water
We review your report and what you are seeing. If your levels call for separate tanks, we tell you before pricing anything.
Install and connect
We cut in on the main, connect the tank and brine tank, run the drain and add the bypass. Most installs take a single visit.
Program, test, explain
We program the valve, run the first regeneration and test the water, then show you the salt level, bypass and settings.
Why choose us for a single-tank system
Honest about the trade-off
One tank saves space, but it is not right for every water. We tell you when two tanks would serve you better.
Sized to your numbers
Capacity is set from your hardness and household, not the biggest tank on the shelf.
Clear on upkeep
You know how much salt to expect and when the media is due, so there are no surprises.
Hard water and a chlorine taste?
A single-tank system can handle both with one footprint. Get the free water report and a written price before you decide.