Dual-Tank Water Filtration Systems in Irvine
A carbon tank and a softener side by side on the main line, so chlorine, odor and hardness are each handled by media sized for that job alone.
See if dual-tank fits — (949) 762-7921
Each problem gets its own tank
A dual-tank system puts filtration and softening in separate tanks on the main supply line, usually in the garage or along a side yard. The first tank holds carbon chosen for the chlorine or chloramine in Irvine Ranch Water District supply, and the second softens the water so scale and spotting stop. Keeping them apart lets each tank be sized for its own job, and it protects the softener resin from the disinfectant that wears it down. Irvine Water Systems recommends dual tanks for larger households, higher hardness and homes that want both stages to last as long as possible.
What a dual-tank install covers
Two tanks, planned as one system. Here is what goes into it.
Free water report
We check hardness and disinfectant so each tank is filled with the media your water actually calls for.
Flow-rate sizing
We count bathrooms, fixtures and people to size both tanks, so pressure holds up when several taps run.
Sediment pre-filter
A first stage catches grit before it reaches the carbon and resin.
Carbon filtration tank
Catalytic or activated carbon to reduce chlorine, chloramine, taste and odor across the house.
Softener tank
Ion-exchange resin sized to your hardness, placed after the carbon so it is protected from the disinfectant.
Bypass valves
Each tank can be isolated for service without shutting water off to the home.
Leak-tested connections
Every joint is pressurized and checked dry, and both tanks are flushed before you use the water.
Maintenance schedule
You get salt, pre-filter and media timing for both tanks, written down.
How the install goes
Report and recommendation
We go over the report and confirm two tanks are the right call. If one tank or a point-of-use filter would cover it, we say so first.
Install day
We shut off the main, cut in and mount both tanks with bypasses and a drain line. Most installs finish in a single visit.
Flush and walkthrough
We flush the media, run the first regeneration, check every joint and show you the bypasses and salt tank.
Why choose us for a dual-tank system
Each tank sized on its own
Filtration and softening get the capacity they each need, not a compromise between them.
One price, settled up front
The installed price for both tanks is written before work starts.
Built to be serviced
We leave room around the tanks and label the valves, so media changes are quick.
Want filtered, soft water at every tap?
Start with the free water report. It shows whether two tanks are the right fit and exactly what they would cost to install.